Does your JBL speaker cracking noise while it is playing music? JBL speakers are sensitive to various problems that could cause crackling or distorted sound. If such a crackling sound is present in your JBL speakers, you could try to fix it instead of throwing it away. In this article on Digimigia, we will tell you the reasons of your question, “Why does my JBL speaker crackle?” and the methods by which you could fix such a problem. Let’s dive into it.
Common Causes of Crackling Sounds in JBL Speaker
When you want to listen to your favorite playlist or podcast, the last thing you hear is your JBL speaker making a crackling sound. But don’t pause your tunes too long because we’ve got you covered. We can tell you how to fix it all. Here’s everything you need to know about the potential reasons why your JBL speaker is crackling. Understanding the cause behind your JBL speaker’s crackling sounds and problems is necessary to fix the JBL speaker crackling sound. Some of the common reasons are:
- The device is not in range
- Damaged speaker driver
- Faulty electrical connections or low battery
- Your speaker interference from other devices that are near
- If the JBL Speaker Flip 6 is out of Bluetooth range, it will make a crackling sound
- Using incorrect audio settings
- Due to a software malfunction
- The Bluetooth receivers are damaged
- Due to a loose connection in the back of the speaker
Troubleshooting JBL Speaker Crackling
Dealing with a JBL Bluetooth speaker sound problem can be disturbing you, but these troubleshooting steps can offer an effective solution to the crackling sound and could be the answer to how to fix JBL speaker crackling sound:
- Set the right volume: Sometimes, just reducing the volume can lower the crackling noise. Examine your speaker at high and low volume levels to see whether there are any differences.
- Check the connectivity of the Bluetooth: Make sure that your DJ JBL speaker is within range of the playback device and that there are no disturbance sources. Put your speaker or Bluetooth devices in a different position. You can also change your Bluetooth channel to reduce the interference.
- Connect your speaker again: disconnect your speaker from your Bluetooth device and reconnect it again after a while.
- Clean the speaker: Dust and rubbish can gather on the speaker drivers, and the sound quality can be affected by it. Use a soft brush or compressed air to clean the speaker grille or drivers and remove dirt and dust.
- Check with a different audio source: Connect your JBL Outdoor speaker to another audio source to specify if the crackling noise exists on other devices. This can help separate the problem from the speaker or the audio source.
- Factory reset: If the previous steps fail, executing a factory reset can often solve persistent issues with your JBL speaker cutting out.
Advanced Fixes for Persistent Crackling
Persistent crackling sounds in JBL speakers can be quite disappointing, but there are several potential solutions you can try to fix the issue. If you’ve already tried some common troubleshooting steps, let’s test a few more solutions:
- Update JBL speaker drivers: Software updates keep your JBL speaker up-to-date so that software problems can be solved.
- Check for contradictory software: certify that there are no inconsistent applications running in the background that could affect the speaker. Close unnecessary programs before starting to play a tune.
- Change your USB port: Sometimes, USB ports can have issues that affect the audio quality of your JBL speaker and make crackling sounds. This is also can be the reason of why is your JBL speaker crackling while charging because of its port.
- Check your hardware connection: make sure that all your JBL speaker cables and connections are fixed. Loose or damaged cables can cause crackling sounds.
How To Fix JBL Speaker Crackling Sound?
In order to know how to fix JBL speaker crackling sound, you should find the reason of why is your JBL wifi speaker making a weird noise. A crackling sound on your JBLL speaker means that there is a problem with your Bluetooth connection, and there could be issues with your speaker. It can also be because of the following reasons:
- The speaker is far from the Bluetooth device.
- The Bluetooth receiver is defective.
- The speaker’s wires are loose.
Now, let’s look at the best solution to fix the crackling sound after you understand why is your JBL speaker making weird noises:
- Move the speaker or device. It means that you pick up the speaker and bring it closer to the Bluetooth device. Alternatively, please pick up the Bluetooth device and bring it closer to the JBL speaker. Additionally, ensure that there is little to no blockage between the device and the speaker.
- Check the Bluetooth receivers. You can do it by connecting your device to another speaker. If the speaker fails to operate, the Bluetooth signal is the problem. However, if you connect the device to a different speaker and it functions well, this indicates the JBL Waterproof speaker Bluetooth receiver is faulty. Having determined that the receiver is defective, you will need to repair it or replace it.
- Inspect the speaker’s wiring. You can open the speaker while it is on. Locate the connectors on the rear end of the speaker. While you are listening to the crackling noise, adjust the wires slowly and carefully. Be keen to listen to the noise or sound as it changes. Solder any loose wires in place to prevent loose connections from reoccurring.
Contacting JBL Support for Crackling Issues
If you are experiencing issues with your JBL speaker, such as JBL speaker crackling sound, contacting JBL support can be a good step. You can contact them through the following ways:
- You can find support on the JBL support page. You will have various resources here.
- One way is to call them and talk to a support agent. It is possible to call on Monday to Friday from 9:00 am to 11 pm and on Saturday to Sunday from 9:00 am to 5:00 pm and talk about the crackling issues that you have with your JBL Speaker.
- You can also chat with JBL support on Monday to Friday from 9:00 am to 11:00 pm and on Saturday to Sunday from 9:00 am to 5:00 pm.
- If there is nobody to chat with about your JBL Bluetooth speaker crackling sound, you can call them or email them.
However, it is better to check all of the solutions that you can do yourself before contacting JBL Support for the crackling issue.
FAQs About JBL Speaker Crackling
- Why is my JBL speaker crackling at high volume?
Because you push the JBL speaker to its limits, although it has a maximum volume, it doesn’t mean you can increase the volume as much as you want.
- Can interference cause my JBL speaker to crackle?
Yes. Ensure there are no obstacles or interference sources near your JBL speaker.
Conclusion
In this article on Digimigia, we tried to tell you why is your JBL speaker making weird noise. A crackling sound on your JBL speaker means it has a problem, and there could be an issue with your speaker. Some of the reasons for the crackling sound are related to the distance of your JBL speaker and the Bluetooth device, or it is related to the loose of wires. If you connect the device to a different speaker and it functions well, this indicates the JBL speaker’s Bluetooth receiver is faulty. Having determined that the receiver is defective, you need to repair it or replace it. If this article was helpful, kindly show your support by leaving a comment.