Clicking Noise From Speakers , clicking noise in speakers

The clicking noise from speakers is a frequent problem encountered in audio settings. Identifying the source of an audio issue can be challenging, necessitating a combination of expertise, experience, and experimentation. This guide on Digimigia aims to assist you in determining the potential causes of clicking noise from speakers that occurs whenever you power on them.

Common causes of clicking noises in speakers

To learn how to fix clicking noise from speakers, you should also think about possible causes. Here are some of the reasons of coming clicking noise in speakers that we will discuss in the following:

Loose or damaged cables and connections

There are several reasons for speakers making clicking noise, mainly related to the connection between your output device and the speaker. Issues like cables, amplifier problems, loose connections, damaged internal parts, or very high volumes can lead to this. You should make sure that all your connections are tight and correctly plugged in. It can also cause clicking noise from speakers car audio.

Electrical interference and Ground-loop issues

Electrical interference is a common source of unwanted noise in speakers. When these devices are in use, they can emit electromagnetic signals that disrupt the speaker system that are resulting in a clicking noise. Ground loops also happen when there are several ground paths in an audio system, causing a difference in electrical potential. Ground loops usually arise from improper grounding or from using multiple devices connected to different power sources.

Faulty hardware: amplifier, internal wiring, or sound card

Low-quality or damaged cables can add noise to the audio signal. Loose connections, worn wires, or cables that lack proper shielding can capture interference and send it to the speakers, causing unwanted noise. If your audio amplifier is not working correctly, it may produce clicking noise that reaches the speakers. This could be caused by internal component issues, or overheating, or a flawed design.

Step-by-step troubleshooting guide

How to fix speaker crackling sound? Handling clicking sound from speakers can be annoying, but these troubleshooting steps usually provide a good solution. Here are step-by-step speaker clicking sound fix in the following that we are going to discuss:

Inspect and reconnect cables

First, disconnect the cables and reconnect them to check if that resolves the issue. If you have spare cables, try those to see if the problem continues. It’s also a good idea to turn them off regularly and clean them well using cotton swabs, microfiber cloths, and a cleaning solution to get rid of dust. If they are quite old, they might have started to rust and need a deoxidizer instead of a regular solvent. However, while a faulty connection between the amplifier and speaker is often the cause of crackling, this isn’t always the case! Therefore, if nothing else works, it might be helpful to inspect the speakers for any loose or damaged parts, or loose internal wiring.

Reduce environment interference

finding possible sources of electromagnetic and radio frequency interference can be very helpful in order to solve clicking noise from the speaker. Move electronic devices such as mobile phones, Wi-Fi routers, and other wireless gadgets far away from your speakers. Temporarily turn off these devices to check if the clicking noise goes down. If the clicking noise being decreased or stops, it shows that these devices were causing the interference.

Test with alternate devices and sources

You can connect the speakers to another devices and sources such as a different phone, computer, or audio player. If the clicking sound goes away, the original audio source device is probably the issue. Connecting the speakers to the device using a new, reliable audio cable can be also helpful. If the clicking noise stops, then the old cable was defective.

Update/Reinstall audio drivers and settings

Make sure to check for updates to your audio drivers and install them if there are any, particularly if you are using Bluetooth speakers. Old or damaged drivers can lead to static noise problems. Reinstalling the audio drivers may also fix ongoing software issues. Updating the drivers can help reduce clicking noise from speakers. Sometimes, reverting to an earlier version of the driver can be beneficial if the problem of clicking noise from speakers began after a recent update.

Check hardware internals and clean speakers

You can turn off your speakers and carefully remove any dust or debris with compressed air. Make sure that the internal parts are clear of any blockages that could impact their performance. Built-up dust can cause bad contact points and inconsistent connections, resulting in static noise from the speakers. Cleaning them regularly can help keep your speakers working well and minimize static sounds.

Conclusion

In this study on Digimigia, we looked at various reasons for clicking noise from speakers, while we explained the main issue, why it occurs, and how to resolve it. If you’re looking to fix the clicking noise in your speakers, we hope this guide has been useful.